Step 1: Needed Items
First off, you will need some polymaker polyMax PLA: HERE
Screws:
- M2 6mm x4
- M2 8mm x16
- M2 10mm x4
- M2 12mm x6
- M2 14mm x4
- M3 8mm x10
- M3 10mm x2
- M3 12mm x4
- M3 14mm x2
- M3 16mm x1
- Self Tapping M1.4 x4
- Counter Sunk M3 Washer x2
——————–
TPU (Polymaker HF)
Print all of the TPU Items that can be found in an organized way HERE.
————-
PLA (PolyMAX PLA)
Print all of the PLA Items that can be found in an organized way HERE.
————-
Carbon Fiber (Get cut from a service)
Download HERE
————-
Motors
Brotherhobby 2205 “DrQuads” 2140KV 6S
————-
AIO
HAKRC 50a AIO
————-
Props
HQ 3.5inch 5 Blade
————-
other items (non sponsored)
DJI AirO3 YOU NEED THE LONG CABLE: HERE
121 GPS
Step 2: Build
The build is pretty standard except for the top part, so i show you how to do most of that in the below video
Step 3: Betaflight
Given that you have the HAKRC 50a aio you can use THIS cli for BF 4.4. otherwise you can look at the pictures below for the tune.
Step 4: Support the Cause!
Without your guy’s continued support I could not keep spending the time I need to make these designs and guides. Thank you so much to all my patreons!
