Step 1: Needed Items
First off, you will need some polymaker polyMax PLA: HERE
Screws:
- M2 6mm x20
- M2 8mm x16
- M2 10mm x4
- M2 12mm x6
- M2 14mm x4
- M3 8mm x10
- M3 10mm x2
- M3 12mm x4
- M3 14mm x2
- M3 16mm x1
- Self Tapping M1.4 x4
- Counter Sunk M3 Washer x2
——————–
GET THE FILES!!!!!
TPU (Polymaker HF)
Print all of the TPU Items that can be found in an organized way HERE.
————-
PLA (PolyMAX PLA)
Print all of the PLA Items that can be found in an organized way HERE.
————-
Carbon Fiber (Get cut from a service)
Download HERE
————-
Motors
RCINPOWER 1404 3850KV (cinematic)
Flyfish 1404 4500KV
————-
AIO
HAKRC 40a AIO
————-
Props
Gemfan 2.5 inch 5 Blade
————-
Or if you are willing to buy in bulk I can ship you Dogcom or bosslipo
email for inquiries: Duskrotor@gmail.com
other items (non sponsored)
DJI AirO3
121 GPS
Other Links
Screws: LINK to amazon’s pretty good screw filter results
- M2 8mm x16
- M3 8mm x4
- M2 10-14mm x4
- M2 Heatset Inserts x4 LINK
- M2.5 12mm x2
- M2 14mm x4
- M3 10mm x2
- M2.5 Hex Nut x2 LINK
- M2 8mm Self Tapping x4 LINK
- M3 14mm x1
- M3 12mm x3
- M3 Hex Nut x2 LINK
- M2 6-7mm x4
- M3 Countersunk Washer LINK
Other:
- XT60E-M DONT NEED
- Heatsink
- Thermal Pad
- USB To AirO3 DONT NEED
- ND Filter Set used in DRX ND system
- Carbon Fibre Cutting service – Unless you have a CNC machine in your home you will need to pay a guy to get the frame cut for you. Give him the DXF included HERE and he should be able to cut it easily.
- Heat Shrink
- HakRC 40a AIO
- Foxeer Lolipop 4 DONT NEED
- DJIO3
- DRX ND System
- Diatone Battery Strap
- Fastening Tape
- Forceps HERE and HERE
- E7000 Glue
- Metal Ring For battery Strap
- GUMMY GRIP PAD