Getting Started With FPV – the Ultimate 3 inch Whoop

duskrotor

Join the LIVE Setup Stream:

Join Discord

Download Files

Google Drive of Files

What To Buy

Estimated Cost: $984.99

(Note, if you plan on buying all these items from me I can get it to you cheaper but due to shipping costs its only saving you money if you buy at least 200$~ worth of the items from me)

Here are the things you will need for General FPV:

  1. Googles: DJI Integra $349 
  2. VTX: DJI O3 $229
  3. Controller: Jumper T20S $115
  4. Charger: ISDT Q6 Nano $29.9

Here are Some things you will need for the Drone we will build:

  1. Batteries: Bosli-po 1050 4s 150c $33.9
  2. Reciever: Radiomaster ELRS EP1 $18.99
  3. Fc and ESC: HakRC 40a AIO $66.9
  4. Motors: Tmotor 1604 3800KV $79.99
  5. Diode: Rush PFB Lite $4.99
  6. Capacitor: Panasonic FM 35v 1000uF Low ESR $8.49
  7. Props: Gemfan D76 $12.99
  8. Frame: MechaO3 CF Frame $16.99
  9. Battery Strap: Diatone 10mm x 115mm
  10. Battery Pad: Gummy Grip Pad
  11. GLue: e7000 & JBWeld
  12. ND System: (message me)

Here Are some screws and Stuff:

  1. M3:
    1. 8mm
    2. 10mm
    3. 12mm
  2. M2:
    1. 6mm
    2. 7mm
    3. 8mm
    4. 10mm
    5. 12mm
    6. 14mm
  3. M3 Counter Sunk Washer
  4. M3 18mm Standoffs
  5. M2 Counter Sunk Washer
  6. M2 Heat Set Inset
  7. M2.5 10mm-12mm
  8. M2.5 Hex Nut

 

Here are some items you will need to Print: DOWNLOAD

  • Main Shell – Print with PolyMax PLA
    • File Name:  “o3MechaRoach FRame v1.stl”
    • 0.4mm Nozzle
    • 2 walls
    • 15% infil

 

  • Prop Guards – Print them with Polymax PLA
    • File Name:  “o3MechaRoach Props v1.stl”
    • 0.4mm Nozzle
    • 3 walls
    • 15% infil
    • RANDOM z seam
    • Gyroid Infil
  • AIO Holder – Print them with Polymax PLA
    • File Name:  “Mecha_AIO_SUPERTHIN_BigAIo.stl”
    • 0.4mm Nozzle
    • 3 walls
    • 15% infil
    • RANDOM z seam
    • Gyroid Infil
  • DJI Holder – Print them with BLACK PolyMaker TPU
    • File Name:  “DRX Cine O3 Gopro Mount V4.stl”
    • 0.4mm Nozzle
    • 2 walls
    • 15% infil
    • Gyroid Infil

Other TPU Parts:

  • 4 Feet:
    • “Mecha03 feet 9mm.stl”
  • 1 Gopro Holder:
    • “o3MechaRoach GOpro 03 v2.stl”
  • 1 each JST:
    • “mecharoach jst Left.stl”
    • “mecharoach jst right.stl”
  • 1 Battery Holder:
    • “Mecha Battery Slot.stl”
  • 1 Back ELRS Holder:
    • “o3MechaRoach Batt Back ELRS v1.stl”

Video Guide:

Here is the Playlist that Has The walk Through (build starts at ep03)

Post Views: 531